HBT multiplexer with analog outputs

CA1 or CA4 : LVDT/HBT multiplexer with analog outputs

Back to the list

CA1 or CA4 : LVDT/HBT multiplexer with analog outputs

The CA1 or CA4 is a compact conditioner module for half bridge (HBT) or LVDT probes. It is powered from the mains 24VDC

The zero and gain setting makes it compatible with most of the market's probes.

Product detail

Presentation

References

Downloads

Related products

A 1 or 4 channels probe conditioner with analogue output

The CA1 or CA4 is a compact conditioner module for half bridge (HBT) or LVDT probes. It is powered from the mains 24VDC

The zero and gain setting makes it compatible with most of the market's probes.

It is fitted with 1 or 4 analogue outputs from 0 to ±10 VDC and 0 to ±20 mA.

By mixing the zero and the gain (from 0 to 100%) and the full scale, it is possible to get a current output of 4-20mA or a voltage output from 0 to + 5VDC or 0 to + 10VDC

Main characteristics :

1 or 4 independant channels
Current or voltage output
Inductive HBT or LVDT probe
Robust
DIN connectors
24VDC power supply

Description

Dimensions (mm)	126 x 110 x 53
Mass	300 g
Power supply	24 VDC
Consumption	2 VA
Operating temperature	0 à 40 °C
Storage temperature	-20 à + 85°C
Connection	DIN connectors (5 PINs) and screw terminal
Energising frequency	11.7 kHz
Energising voltage	4 Vpp
Output voltage	± 5 VDC FS (500 Ohms minimum load) ± 10 VDC FS (1 kOhms minimum load)
Output current	± 20 mA FS (150 Ohms maximum load only with ±5 Vcc)
Oscillator protection	Protected against openings and short circuits.
Output filter	500 Hz bypass (-3dB)
Type of probe	Half bridge (HBT) (2 kOhms load) and LVDT
Probe's sensitivity	Adjusted for Half bridge, adjustable between 45 to 450 mV/V