Back to the list
CA1 or CA4 : LVDT/HBT multiplexer with analog outputs

CA1 or CA4 : LVDT/HBT multiplexer with analog outputs

The CA1 or CA4 is a compact conditioner module for half bridge (HBT) or LVDT probes. It is powered from the mains 24VDC

The zero and gain setting makes it compatible with most of the market's probes.

Product detail
Presentation
References
Downloads
Related products
A 1 or 4 channels probe conditioner with analogue output

The CA1 or CA4 is a compact conditioner module for half bridge (HBT) or LVDT probes. It is powered from the mains 24VDC

The zero and gain setting makes it compatible with most of the market's probes.

It is fitted with  1 or 4 analogue outputs from 0 to ±10 VDC and 0 to ±20 mA.

By mixing the zero and the gain (from 0 to 100%) and the full scale, it is possible to get a current output of 4-20mA or a voltage output from 0 to + 5VDC or 0 to + 10VDC

Main characteristics :

  • 1 or 4 independant channels
  • Current or voltage output
  • Inductive HBT or LVDT probe
  • Robust
  • DIN connectors
  • 24VDC power supply
Description

Dimensions (mm) 126 x 110 x 53
Mass 300 g
Power supply 24 VDC
Consumption 2 VA
Operating temperature 0 à 40 °C
Storage temperature -20 à + 85°C
Connection DIN connectors (5 PINs) and screw terminal
Energising frequency 11.7 kHz
Energising voltage 4 Vpp
Output voltage ± 5 VDC FS (500 Ohms minimum load) ± 10 VDC FS (1 kOhms minimum load)
Output current ± 20 mA FS (150 Ohms maximum load only with ±5 Vcc)
Oscillator protection Protected against openings and short circuits.
Output filter 500 Hz bypass (-3dB)
Type of probe Half bridge (HBT) (2 kOhms load) and LVDT
Probe's sensitivity Adjusted for Half bridge, adjustable between 45 to 450 mV/V
Article references

Items
References
CA4
References: 12004
CA1
References: 12001
Related products

Metro - Newsletter
so you don't miss anything
Subscribe to our newsletter