Miniature digital probes
Miniature digital probes
The mini probe is a compact low profile transducer that is ideal for measurement in confined places sucge as bores. The transducer is based on a parallel spring structure taht ensures that it provides excellent repeatability over a long working life, even when rotated in bores that have key slots or lubrication ports.
In a world where everything has became digital, the digital probe brings important improvements with regards to the existing technologies. The digital probe consists of the probe itself and of its electronic head.
The digital probes have the same dimensions as the conventional probes and can be installed with similar mounting arrangements.
The electronic head houses the circuits that encures the digital conversion of the signal as well as the communication management with the M-bus network. A "T" connector allows the probes juxtaposition.
The digital probes are equipped with a M-bus network interface compatible with our display units.
The mini probe is a compact low profile transducer that is ideal for measurements in confined places such as bores. The transducer is based on a parallel spring structure that ensures that it provides excellent repeatability over a long working life, even when rotated in bores that have key slots or lubrication ports.
- Mechanical travel : 0.63 mm (max)
- Measurement range +/- 0.25mm
- Excellent repeatability
- Resolution : from 0.005 to 0.08 micron
- Chromium steel body
- Gaiter in Viton®
- IP65
| Mechanical travel (mm) | 0.63 maximum |
|---|---|
| Measurement range (mm) | ± 0.25 |
| Start of measurement range | 20 à 30 µm from limit stop |
| Repeatability | |
| - à 100 µm from limit stop | 0,1 µm on axis et 0,1 µm cross axis |
| - à 250 µm from limit stop | 0,25 µm on axis et 0,15 µm cross axis |
| - à 500 µm from limit stop | 0,5 µm on axis et 0,25 µm cross axis |
| Resolution | 0,01 µm with Metro Conditioner |
| Bandwidth | Adjustable from 6 Hz to 460 Hz |
| Reading rate | Up to 3906 readings/second (dynamic measure mode) |
| Tip force (N) @ center travel | 0,7 N ± 25% |
| Temperature coefficient | 0,08 µm/°C |
| Mass | 15g |
| Materials | Body : Chromium steel, Gaiter : Viton |
| Fixation | M3 screw (supplied) |
| IP rate | IP65 |
