Metrology measuring devices

HBK U9C Force Sensor

Cost-effective miniature load cell for compressive and tensile forces up to 50 kN.

Details

HBK C2 Force Sensor

Reliable compression force measurement up to 200 kN

Details

HBK S2M Load Cell

Precise, S-shaped S2M force transducer for small forces up to 1 kN.

Details

P2 / P3 Portable Displays for Strain Gauge sensors

The P2 and P3 are state-of-the-art portable instruments for strain gauge sensors, combining laboratory-grade precision with the simplicity of a smartphone, for measuring force, torque, pressure, or weight.

Details

Analog and USB Output signal conditioner

The CD1-SG-ANA signal conditioner provides digital acquisition and processing of signals from strain gauge sensors.
The signal is converted by a 24-bit ADC, then digitally processed before being output via USB, 0–10 V or 4–20 mA.

Details

F1 / F2 / F3 Displays for Strain Gauge sensors

The F1, F2, and F3 are state-of-the-art industrial instruments for strain gauge sensors, designed to meet the strictest requirements for testing and production, from manual inspection to automated stations.

Details

IO-Link signal conditioner

The CD1-SG-IO-Link signal conditioner for strain gauge sensors represents a real evolution compared to traditional amplifiers with analog output (0-10 V, 4-20 mA).
While conventional analog solutions remain limited by issues of accuracy, transmission noise, and configuration complexity, IO-Link is now establishing itself as the new industry communication standard.

Details

M400 industrial touchscreen display for multi-dimension inspection

Digital readout for gauging probes M400

The M400 is a state-of-the-art multifunction industrial display designed to handle any dimensional inspection application, from simple manual control to a fully automated production line.

Details

DPC20 Pressure measuring device for aerosol cans

The DPC20 is a compact device, allowing to control pressure in aerosol cans. Thanks to its intuitive menus and its general simplicity the DPC20 is a device that will be immediately adopted by every operator.

Details

CA1 or CA4 : LVDT/HBT multiplexer with analog outputs

The CA1 or CA4 is a compact conditioner module for half bridge (HBT) or LVDT probes. It is powered from the mains 24VDC

Details

M5 Display for Inductive Probes

The M5-Inductive display is a state-of-the-art tool for performing complete dimensional inspection with 2 inductive sensors.

Details

HBT Probe - Pneumatic actuation

With this version, the forward stroke is kept entered by a spring and is activated by air pressure. This type of probe enables to make compact and cost reduced automatic measurement systems.

Details

Half bridge (HBT) analogue gauging probe SPRING PUSH

Used since a long time, Inductive probes are often combined with the Metro displays units

Details

Miniature analog gauging probe

The mini probe is a compact low profile transducer that is ideal for measurements in confined places such as bores.

Details

Digital gauging probes SPRING PUSH

On this version a spring ensures the actuation of the forward stroke and the contact pressure with the part to be measured.

Details

Digital gauging probes PNEUMATIC ACTUATION

On this version the forward stroke is actuated by pressured air.
This type of probe enables to make compact and cost-reduced automatic measurement systems.

Details

Miniature digital probes

The mini probe is a compact low profile transducer that is ideal for measurement in confined places sucge as bores. The transducer is based on a parallel spring structure taht ensures that it provides excellent repeatability over a long working life, even when rotated in bores that have key slots or lubrication ports.

Details

Digital lever probes

Lever probes are for example used for precision gauging of components, such as shafts, for profiling. The narrow body (compared to devices based on dial test indicators) coupled with a gentle touch down to 0.05N enables access to difficult to reach details , even on fragile components.

Details

Heidenhain serie MT (Metro)

Heidenhain MT probes are compatible with Metro displays, as well as M-Bus conditioners

Details

Heidenhain serie ST (Specto)

Length gauges from Heidenhain offer high accuracy over long measuring ranges. They have a wide range of application in production metrology, in multipoint inspection stations, measuring equipments monitoring and as position measuring devices.

Details

Flexures block gauge "AU" and "DU"

Flexure block gauge is ideal for very high volume and high precision applications such as bearing components gauging. It is often the best solution for measuring moving materials, such as roughness testing.

Details

Block gauge BG

The block gauge BG enables to make simple and reliable measurements. It is particularly adapted to control bores or more generally where it is difficult to use a standard pencil probe. The motion is ensured by precision linear bearings that ensure an excellent repeatability.

Details

Mux 4 et Mux 8

The Mux4 and Mux8 multiplexers allow the connection of 1 to 8 measuring instruments (caliper, micrometer, comparators, scales, etc.) with a PC or other similar equipment equipped with a USB port or an RS 232 interface

Details

M400 Aerosol

Metro has designed the M400 Aerosol especially for the dimensional control of cans.

Details

M5 Display for Air Gauging

The M5 Air Gage version display is a state-of-the-art tool for performing complete dimensional inspection with 1 or 2 pneumatic measuring devices.

Details

M5 Display for Heidenhain Incremental Sensors

The M5-Heidenhain display is a state-of-the-art tool for performing complete dimensional inspection with incremental sensors, scales and encoders.

Details

MB-NET

Communication module for Metro displays.

Details

MB-IO

Module for automation with 8 optocoupled inputs/outputs.

Compatible with M5/ M400 displays and master modules MB-RS/MB-IP

Details

E-Mux 4D / E-Mux 8D : Expandable multiplexer for instruments

The E-Mux4 and E-Mux8 multiplexers allow the communication of 1 to 4 and 1 to 8 instruments respectively with a PC or other similar equipment equipped with an RS 232 interface or a USB port.

Details

Air gaging : High precision measurement technology

Air gaging is ideal for controlling large series of parts (automotive sector for example) or parts with high added value (aeronautics, medical, defense)

Details

MB-4i / MB-8i

Module to connect 4 or 8 inductive probes max

Details

MB-RL

The MB-RL upgrades older Monocote displays fitted with the optional relay board. Compatible with M3 / M400 displays.

Details

MB-TP

Module to connect 1 temperature sensor. It can be used on the M3 and M400 displays for either an alarm when the temperature changes from a defined value since the last preset, or for temperature compensation.

Details

MB-PS

Power supply module for M-Bus network This module give aditionnal power supply when the number of modules used together is excessive.

Details

MB-1R

Module 1 RS232 input to connect instrument, weight scale ...

Details

MB-1A

Module with 1 analogue input

Module to connect 1 device with an analog output 4-20mA or 0/+10V

Details

MB-RO

Relay Output module, with 1 relay output, to pilot air economy system or aig gage probe output.

Details

MB-RC

Module of 4 programmable buttons.

Details

MB-AG

Module to conncet 1 air gage

Details

MB-2S & 2S-LIN

Module to connect 2 incremental probes from Heidenhain

11µA or 1Vpp output signal.

Details

MB-BT

Connection of Sylvac wireless measuring instruments

Details

MB-4C

Connection of 4 capacitive probes from Sylvac

Details

MB-4M

Connection of 4 Magnescale probes

Details

MB-2T

Connection of 2 TTL probes or encoders

Details

MB-1D / MB-4D

Connection of 1 to 4 measuring instruments (caliper, micrometer, digital indicator, weight scale etc.) from any brand

Details

MB-8µE

Connection if 8 laser probes from Micro Epsilon ref optoNCDT 1320/1420

Details

Custom force sensors

Your application does not fit a catalogue sensor?

We work with you to define a force sensor matched to your geometry, capacity and integration constraints.

Details

HBK U10M Force Sensor

High precision tensile and compressive force measurement up to 1.25 MN

Details

HBK U93A Force Sensor

Static and highly dynamic force measurement up to 50 kN, IP68 rated

Details

FMB-PLC

The FMB-PLC is the M-Bus master module dedicated to automation applications, providing the interface between the production line's PLC and the full range of M-Bus modules.

Details

FMB-MA

The FMB-MA is the M-Bus master module dedicated to PC-based applications, providing the interface between the control PC and the full range of Metro precision measuring modules.

Details