HBK U10M Force Sensor
U10M Force Sensor: Benchmark Precision for High Capacities
The rotationally symmetric, low-profile U10 force is oustanding precise and made from rustfree materials.
U10M load cells are suitable for acquiring fast, dynamic force trends and static forces.
HBK offers a wide range of options (Double bridges, TEDS, mechanical adaptations, integrated amplifiers,...) so that a U10 can be adapted to its measurment task.
- HBK accuracy class: 0.02 ... 0.05
- Capacities: 1.25 kN ... 1.25 MN
- Output signals: mV/V (passive, Wheatstone Bridge) and IO-Link
Your advantages:
- Greater precission: Linearity error 0.005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TC0: 0.006 %/ 10 K.
- Improved reliability: The Sensor Health monitoring of the U10M sends warnings in case of exceeding temperature or mechanical limits before problems occur.
- More information: Temperature measurement, statistical information.
- Many built in features: Limit switches, peak detection, digital output, filter.
- Fast: Internal sampling rate: 40 kHz, 1 ms cycling time to the IO-Link master.
Advantages of all U10M:
Precise
- Benchmark precision.
- TC0 of 150 ppm/ 10 K or 75 ppm/ 10 K with 200 % calibration. With integrated amplifier: 75 ppm/ 10 K or 60 ppm/ 10 K with 200 % calibration.
- Minimal linearity deviation and hysteresis and very good repeatability.
- With integrated instrument: Linearity deviation at the physical limit.
Large measuring range in compliance with specified accuracy requirements, improved yield in product tests through small error bands. Even lower measurment uncertainty with build-in amplfiers.
Robust
- Made from rust-proof materials, degree of protection IP68 (with cable option).
- Electrical bending moment compensation: Bending (for example resulting from applied lateral forces) does not impact the measurement result.
- Fit for fatigue tests, peak to peak load of 200 % of nominal force can be applied.
- Vibration resistant.
- EMC approved.
- With IO-LNK: Sensor Health monitoring warns in case of exceeding mechanical or thermal limits.
Reliability even in unfavorable measurement conditions (e.g. temperature gradients, parasitic mechanical influences). Improved reliability with built-in amplifier.
Adaptable to your needs and cost effective
- U10M optimally adapts to its measurement task: Over 15,000 combinations are available.
- Select from many options such as TEDS, flange or foot adapter version, 100 % or 200 % calibration, load introduction pin, several connectors and cable options and more.
Time saving with plug-and-play solutions, easy adaption, cost-effective amplifier versions.
| Maximum capacity (nominal load) | 1,25 kN, 2,5 kN, 5 kN, 12,5 kN, 25 kN, 50 kN, 125 kN, 250 kN, 500 kN, 1,25 MN |
| Tensile / compression | Tensile & compression |
| Type/technology | Strain Gauge |
| Calibration | Calibrated |
| Output signal | mV/V (passive strain gauge) |
| Degree of protection | IP67 |
| Mechanical interfaces | Both sides central internal thread, One side central internal thread, other side flange |
| Height (without accessories) | 34.9 mm, 44.5 mm, 63.5 mm, 88.9 mm, 127 mm |
| Diameter (without cable or plug) | 104.8 mm, 390 mm, 153.9 mm, 203.2 mm, 279 mm |
